A trapezoidal roof profiles have ribbed
trapezoidal-shape patterns across the panel. This means, it is a quadrilateral
(or a four-sided shape) that has just a single pair of parallel sides.
Sometimes trapezoidal roofs are mistakenly called corrugated profile. This is a
misnomer because the ripple profile has a repeating wavy pattern on its entire
surface. Trapezoidal ribbed roofs are popular among producers because of their
shape giving them high material efficiency (high strength-to-weight ratio).
This makes it very cost effective. Whether mounted vertically, diagonally or
horizontally, trapezoidal shadows provide clear lines. They also have good
structural characteristics and can withstand design loads well (for example,
snow and wind bulges). However, due to its attachment method, the contour
cannot be considered as an upright seam.
Generally, trapezoidal roofs are fixed on
the surface or straight through (that is, barely fixed), which means that the
panel is fixed in place by fasteners that pierce the material with washer
screws fixed in the structure. The rib spacing varies from 6 inches to 12
inches, and there may be tiny "second ribs" between them, which helps
to stiffen the panel. Although they usually look the same at first glance, the
exact size and angle vary from manufacturer to manufacturer. Trapezoidal rib
roofs are popular all over the world and are cheaper than traditional standing
seam roof profiles. In fact, there are standing seam profiles that also borrow
the benefits of the trapezoidal shape. And they are the industry standard for
large buildings due to the cost-effectiveness of trapezoidal rib geometries.
There is a good analogy to explain the good
structural characteristics of trapezoidal rib roof profiles. Consider the
ancient pyramids. The pyramid shape is just a trapezoid with its top cut off. Pyramids
have literally stood the test of time – over thousands
of years. The sturdy design of the pyramid proves that its shape facilitates
load distribution, creating a more stable support structure.
The trapezoidal profile is used for roof
structures. They are used to build load-bearing roof shells in dry buildings.
The number of supports required for construction in progress can be
significantly reduced, as casing is no longer required for new concrete. The
trapezoidal profile is increasingly used as an additional roof in the
construction of modern multi-storey parking lots. In this application, the
trapezoidal profile is not only used as a shell in the building, but also forms
an integral load-bearing part of the roof structure when completed. In this
case, the carrying capacity of concrete and trapezoidal profiles has been used.
Another well-known application area is composite floor. The special-shaped
steel trapezoidal profile establishes a bond between the concrete and the
steel, so the advantages of the materials used can be fully utilized. In these
floor structures, concrete absorbs compressive forces, while composite floor
profiles absorb tensile forces.
It’s a machine can produce Trapezoidal Panel
in cold roll forming process, normally the forming is starting from the middle to
both sides. The tools are designed according to the profile, so different profile
requires a different roll forming machine. The machine can work on pre-painted
panel, galvanized panel, aluminum panel.
The machine can continuously produce the Trapezoidal
sheet from uncoiling to cutting and stacking.
Formetal is focusing on roll forming technology
for many years, we can provide you a various solution with our experience.