Cable Tray Roll Forming Machine

Cable Tray Roll Forming Machine Manufacturer

Looking for a cable tray roll forming machine built around your own tray profile? Formetal is a cable tray roll forming machine manufacturer supplying automatic cable tray production lines with adjustable tray widths and tooling matched to the customer’s drawing.

Lines are supplied to cable tray manufacturers serving power, construction and infrastructure projects. Machines are built to order, so send your profile drawing and production target for a matching configuration and quotation.

Request a Quote

Available Cable Tray and Related Roll Forming Machines

Cable Tray Profiles and Applications

A single forming principle covers several tray families, and the section drawing decides which one a line is built for. The sections below describe what this type of machine can produce and where the products are used.

Perforated Cable Tray

The standard product of this page: a punched and formed tray with ventilation openings along the base and side walls. Perforation pattern, tray width and profile height follow the project drawing.

Solid Bottom, Ladder Type and Covers

Solid bottom trays, ladder type trays and cable tray covers are evaluated from the customer’s drawing before a machine configuration is proposed, because each profile needs its own roller set and punching arrangement.

Custom Profile Shapes

Sections outside the standard range — special heights, folded edges or non-standard hole patterns — are designed as new profiles, with the tooling built for that section only.

Where Cable Trays Are Used

Cable trays are widely used to support and route power and control cables in substations, power plants, industrial facilities, data centers and commercial buildings. Their dimensions, structural design and perforation patterns are selected according to cable loads, installation conditions and project requirements.

Finished galvanized perforated cable trays produced on a Formetal roll forming line
Perforated cable trays after cutting, ready for inspection and packing.

Cable Tray Roll Forming Machine Specifications

The following parameters are published for Formetal’s automatic cable tray roll forming machine. The final configuration is confirmed according to the customer’s drawing and production requirements.

Parameter Specification
Material Galvanized steel sheet (can be customized)
Material Thickness 0.8 – 1.5 mm
Yield Strength 235 MPa
Forming Speed 10 m/min
Main Motor Power 26 kW (confirmed by final design)
Roller Material Cr12 with quenching treatment, HRC 60–62
Shaft Material 40Cr with thermal refining
Tray Width 100 – 400 mm (subject to profile design and machine configuration)
Control System PLC control system (operation screen + button control)
Customization Available, according to customer profile drawings

The specifications above refer to Formetal’s published automatic model. Actual operating parameters and available profile ranges should be confirmed through technical evaluation of the customer’s drawings and production requirements. Machine structure and model details are on the Automatic Cable Tray Roll Forming Machine product page.

Cable tray profile drawings with widths from 100 mm to 400 mm formed on one line
Profile drawings of the trays covered by this line: widths of 100, 150 and 200 mm, and 100 to 400 mm on the adjustable version.

Customized Cable Tray Production Line Solutions

Every Formetal cable tray production line is configured around the customer’s profile design and manufacturing requirements. Based on the technical drawings, our engineering team evaluates the forming structure, punching tooling and line configuration.

Customization options include:

  • Cable tray width, height and section dimensions
  • Profile shapes, folded edges and structural designs
  • Hole patterns and punching arrangements
  • Material type, thickness and mechanical properties
  • Forming speed, automation level and auxiliary equipment

Have a cable tray profile drawing? Send it to Formetal for a preliminary technical evaluation.

Send Your Profile Drawing

How Does a Cable Tray Roll Forming Machine Work?

A cable tray making machine processes galvanized steel coil through a coordinated sequence of feeding, punching, roll forming and cutting operations. Each stage prepares the material for the next, helping maintain consistent profile dimensions and production accuracy.

Working Process from Coil to Finished Tray

  1. Coil loading. The steel coil is mounted on the decoiler and unwound to supply the production line.
  2. Strip leveling. The strip passes through the leveling unit to reduce coil curvature and prepare a flatter surface for processing.
  3. Length-controlled feeding. The servo feeder advances the strip according to the programmed feeding length before each punching cycle.
  4. Hole and slot punching. The punching press creates holes and slots according to the cable tray profile and punching pattern.
  5. Profile forming. Successive roll forming stations gradually shape the punched strip into the required cable tray section.
  6. Length cutting. The cutting unit cuts the formed tray to the specified length according to the production setup.
  7. Output. Finished cable trays are collected for inspection and subsequent packing.
Cable tray roll forming line layout from decoiler and punching press to run-out tables
Layout drawing of an automatic cable tray roll forming line, from the decoiler and punching press to the run-out tables.

Main Components and Build Quality

The main components of a cable tray roll forming line influence forming accuracy, mechanical stability and long-term operating performance. The following units are key parts of Formetal’s production line.

Servo feeder unit feeding galvanized steel strip into the punching press
Servo feeder between the decoiler and the punching press.
Punching die and mechanical press frame for perforated cable tray production
Punching station with the die set mounted in the press frame.
Forming stations with gear box transmission and quenched rollers
Roll forming stations and gear box transmission side of the line.
Formed perforated cable tray leaving the forming stations of the line
Formed tray leaving the last stations of the adjustable-width line.

Servo Feeder

Controls the strip feeding length before punching, with a feeding accuracy of ±0.15 mm per step to keep hole positions consistent along the tray.

Punching Device

An open-type mechanical press frame carries the punching die, which is made of Cr12MoV tool steel at HRC 62–63, so the die holds its edge through long production runs.

Roll Forming Unit

Forming stations shape the strip in steps, each station taking a small part of the section, and the roller shafts are driven through a gear box transmission for uniform load across the line.

Adjustable-Width Forming Structure

One side of the forming rollers can be moved to change the working width, so different tray widths run on the same line without changing the complete tooling set.

PLC Control System

Operation is centralized on an interface screen with control buttons, and several groups of production data can be stored, so changeovers between the tray sizes the machine is configured for stay short.

Why Choose Formetal as Your Cable Tray Machine Manufacturer?

Choosing a cable tray machine manufacturer involves more than comparing equipment prices. Buyers also need to evaluate profile design capabilities, tooling quality, machine inspection and project support. Formetal works with customers to configure roll forming lines according to their production requirements.

Cable Tray Profile and Tooling Design

Roller profiles, punching dies and the line layout are specified for each project, so the equipment is built around the tray section the customer sells rather than adapted from a standard model.

Cable Tray Line Manufacturing and Installation Support

Formetal coordinates machine manufacturing, assembly and inspection before shipment. Installation guidance and technical support are provided to help customers set up the production line.

Machine Inspection and Trial Run

The machine is inspected and tested before delivery. Working videos are shared with customers for review and confirmation before shipment.

Export Experience for Power & Energy

Formetal supplies roll forming equipment for applications in the power, energy and construction industries, serving customers in different international markets.

Frequently Asked Questions

What is a cable tray roll forming machine?

A cable tray roll forming machine is an automated production line that processes metal coils into cable tray profiles through feeding, punching, roll forming and cutting operations. It is used by manufacturers supplying cable management systems for electrical and construction projects.

What materials can the machine process?

The published automatic model is designed for galvanized steel sheets. The listed material thickness is 0.8–1.5 mm. Other materials and specifications should be evaluated according to the machine configuration.

Can one machine produce different cable tray sizes?

Yes. The machine can be configured to produce different tray sizes. The available width adjustment range and profile changes depend on the roller design, tooling and customer drawings.

How fast does the cable tray machine run?

The published automatic model has a forming speed of 10 m/min. Actual production speed may vary depending on material thickness, punching patterns, profile design and line configuration.

How much does a cable tray roll forming machine cost?

The price depends on tray dimensions, material specifications, punching requirements, production speed, automation level and auxiliary equipment. Contact Formetal with your tray profile for a project-specific quotation.

What information is needed to get a quote?

Please provide your cable tray profile drawing, material type and thickness, tray dimensions, punching pattern and expected production output. Coil specifications and available installation space are also helpful.

Get a Quote for Your Cable Tray Roll Forming Machine

Ready to plan your cable tray production line? Send Formetal your profile drawing and technical requirements. Our engineering team will evaluate your application and recommend a suitable machine configuration.

To help us prepare an accurate proposal, please provide:

  • Cable tray profile drawing (2D or 3D), including width and height
  • Material grade, thickness and yield strength
  • Punching pattern, hole dimensions and spacing
  • Required production speed and finished tray length
  • Coil specifications and available installation space
Contact Us Now
Enter your inquiry details, We will reply you in 24 hours.
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Phone
Products can't be empty
Products you want
Message can't be empty
Verification code error
code
Clear
Contact Us Now
China Roll Forming Machine, Roll Forming Machine Manufacturer | Formetal Roll Forming Machine
No.1, Yaqian Rd, Yaqian Town, Xiaoshan District, Hangzhou, Zhejiang, China
Trust Us for Roll Forming Machines
As a top roll forming machine manufacturer in China, we deliver high-quality machines and excellent services to meet our customers' needs.
Contact Us
©2018 - 2024 Formetal Inc.        SiteMap.html    SiteMap.xml    Terms of Service      Privacy Policy
Marketing Support by Globalsir
Enter your inquiry details, We will reply you in 24 hours.
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Products can't be empty
Message can't be empty
Verification code error
code
Clear