Tube Welding Machine
Description
Reviews
Tube Welding Machine is the special machine which
can produce high-frequency straight seam welded pipe. The composition of
equipment is from uncoiler to fixed length cutting saw. Rolling speed can be
adjusted correspondingly within suitable range of pipe diameter and wall
thickness.
The machine can be
customized based on the customer’s specific technical requirements.
Tube Welding Machine can produce the pipe according to customer’s
requirements, the parameters listed is only for your reference. Special sizes
of the profile can be designed in our company.
Tube Welding Machine can produce the pipe according to
customer’s requirements, the parameters listed is only for your reference.
Special sizes of the profile can be designed in our company.
Work flow
Uncoiler→Shearing
and butt-welder→Horizontal-type Loop
→ Forming unit→ Cooling Unit →Sizing
machine→Cold saw cutting →Run-out table
Layout drawing of Tube Welding Machine
Horizontal
type loop
The
steel strips which is stored in it shall be enough to ensure main machine to
run continuously while welding strips from two coils.
When
change the coil, it doesn’t need to stop machinery to improve the work
efficiency.
Forming Unit
1) Horizontal roll stand
The
structure adopts cast steel, double housing, changing rolls in the side. It is
easy for changing the rolls and stable structure.
2) Vertical roll stand
It is passive
rotation, it is used to assist the forming roll to improve the forming quality.
3) Drive gear box
It adopts spiral
bevel gear and cylindrical gear with high precision.
1) One set of guide roll stand for
controlling direction of pipe seam to insure pipe seam flatly and straightly
entering into extruding rollers.
2) One set of extruding roll stand for
controlling weld seam and realizing successful welding
3) Two sets of scraper frame for scraping
outside weld seam to keep it smoothly and flatness.
Computer
Cutting Saw
It
will cut off the pipe after welding continuously. It adopts fly cutting type. When
cutting off the pipe, the line doesn’t need to stop. It will greatly improve
the work efficiency.
Packaging Details
1. Four *40GP
containers for loading one set of the product line.
2. The whole Wiped Anti
Rust Oil, PLC controller covered by foam film;
3. Spare parts and some
small parts packed in wooden box;
4. All Components Fixed by
steel wire with Container. Suitable for long time sea shipping.